SINGLE TUBE FILTER CHAMBERS FOR FILTRATION TO 750 GPH.
Sethco "DD/DL and KK" Series chambers are recommended for in-tank or out of tank filtration requirements. They feature screw top covers for easy filter tube replacement. CPVC, CPVC/Clear PVC, or Kynar® construction, and solid, integral one piece shell and base design. Engineered for use with any standard filter or carbon filter cartridge.
Unit of Measure

Specifications

Series

N/A DL Series

Material

N/A CPVC/Clear PVC

Max. Temperature

N/A 140 ºF
Max. Pressure at 72ºF1 N/A 100 psi
Recommended Filtration Rate Contamination - Low2 N/A 450 to 750 gph
Recommended Filtration Rate Contamination - High3 N/A 225 to 450 gph

Quantity of Filter Tubes in Chamber

N/A 1 3

Size of Filter Tubes in Chamber

N/A 1 Tube - 30", 15 Micron 3 Tubes - 10", 15 Micron

Dimension A

N/A 35-3/4 "

Dimension B

N/A 4-7/8 "

Inlet/Outlet

N/A 3/4 in NPT
Weight4 N/A 7.6 lbs

Typical Single or Multi Filter Tube Chambers with Sethco Pumps

N/A WITH BEARING FREE SEALLESS VERTICAL PUMP - For in-tank or out of tank installation 20 models with filtration rates from 200 to 4800 GPH. Pumps can run dry. WITH DIRECT DRIVE CENTRIFUGAL PUMP - Features CPVC direct drive pump for filtration rates to 10,000 GPH. 3 models to choose from. WITH END SUCTION MAGNETIC DRIVE SEALLESS PUMP - Filtration rates from 1 to 3300 GPH. Features reliable, leakproof magnetic drive pumps 13 models to choose from. WITH SELF PRIMING MAGNETIC DRIVE SEALLESS PUMP - 11 models with filtration rates from 800 to 3300 GPH. Convenient self priming pump.

Manufacturer

N/A Sethco

Custom Twin Chamber Systems Available

Custom Twin Chamber Systems Available

N/A Add a carbon chamber, bag chamber or resin chamber to any Sethco Filter System or use twin filter cartridge chambers in series with different density media. If higher flow rates or greater din holding capacity is required use 2 chambers n parallel. Call your Distributor or our sales department to discuss your application.

Warranty

Warranty

N/A One year warranty against detective parts and workmanship. See Form TC-01 for full warranty details. Always be specific about your application in order that proper materials may be furnished. Let us or an authored distributor know liquids being handled gallons, temperatures and pH. The standard warranty does not apply when equipment is used contrary to factory recommendations.
Since our policy is one of continual improvement, we reserve the right to change design or materials at any time, without giving notice or creating any obligation to previous or future customers

Note

Note5
N/A Figures shown is for DD series, KK series, rated at 85 psi @ 72ºF
Add approximately 2 pounds for Kynar® chambers
  • 1 Maximum pressure is lower at higher temperatures, consult factory.
  • 2 Filtration rate with 15 micron filter tubes.
  • 3 Filtration rate with 15 micron filter tubes.
  • 4 Add Approximately 20% for shipping.
  • 5